HIGH LIFTER ALK366-00 Atv Lift Kit Arctic Cat 366

• Increases ground clearance by 2" by itself and when combined with larger diameter tires increases of up to 5" are possible
• Lowers the front A-arms similar to the design of lift kits designed for independent front suspension 4WD trucks
• The rear lift rotates the rear axle and raises the ATV
• Increases the space between the tires and fender to allow large tires to be mounted

Foot notes

1    1" SPACERS ARE REQUIRED ON THE REAR IF YOU RUN FACTORY WHEELS WITH A LIFT KIT INSTALLED.
2    NOTE: DOES NOT FIT COMMANDER 100X MODEL WITH FOX SHOCKS *This kit does not work with the HLP spring tool
3    DOES NOT WORK ON ANY MODELS EQUIPPED WITH CABS
4    Polaris 500 Ranger & Ranger Crew NOTE: 1.5" SPACERS ARE REQUIRED IF CUSTOMER WANTS  TO RUN FACTORY WHEELS WITH THIS LIFT KIT INSTALLED
5    NOTE/WARNING: NEW "REAR" HLP PRO SERIES OR GORILLA CV AXLES ARE RECOMMENDED FOR ''11-''12 RANGER BEFORE INSTALLING OF ANY BRAND OF LIFT KIT. THE ''11-''12 MODEL RANGERS HAVE LIGHTER DUTY REAR AXLES THAN  PREVIOUS YEAR MODELS AND ARE MORE PRONE TO BREAKAGE. ALL CUSTOMERS SHOULD BE AWARE OF THESE RISK
6    NOTE:  BE SURE TO ALWAYS CHECK CV BOOT CLEARANCE AT STRUT HOUSING DURING INSTALLATION AS YOU MAY HAVE TO GRIND ALUMINUM STRUT HOUSING TO CREATE  SUFFICIENT CLEARANCE FOR CV BOOTS (EVEN IF YOU ARE RUNNING STOCK CV AXLES) WE HAD TO CLEARANCE THE STRUT HOUSING ON THE ''11 MODEL SPORTSMAN WE TESTED WITH
7    On ''11-''12 models the customer MUST upgrade to a HLP rear axle bar replacement kit (63-69122) models with a lift kit installed the rear axles bind when the suspension is at full extension /droop and are subject to break.
8    On ''11-''12 models the customer MUST upgrade to a HLP rear axle bar replacement kit (63-69120) On  models with a lift kit installed the rear axles bind when the suspension is at full extension/droop and are subject to break.
9    For ''13 Scrambler Customer MUST upgrade to a HLP front axle bar replacement kit  (63-69121), OR  upgrade the front factory CV axles with HLP DHT axles, HLP PRO SERIES axles or GORILLA axles!!! On ''13  Scramblers with a lift kit installed the front axles bind when the suspension is at full extensio
10    A.On ''11-''12 550/850 SPT. models customer MUST upgrade to a HLP front axle bar  replacement kit  (63-69121),  On ''11-''12 models with a lift kit installed the front axles bind when the  suspension is at full extension/droop and are subject to break. B. For ''11-''12 550/850 SPT. models you also m
11    Requires a  1" or greater wheel spacer in the rear when using factory wheels with a lift kit installed. No wheel spacer is required when using aftermarket wheels with a positive offset
12    Requires a 1" or greater wheel spacer in the rear when using factory wheels with a lift kit installed. No wheel spacer is required when using aftermarket wheels with a positive offset.
13    Not recommended with stock axles
14    Will not work with gas shocks